We are first class retailer, wholesaler, and exporter for flow control valve FS-M-PS019 in China since 2009. Quick response, fast delivery.
Application:
The flow control valve can be widely used in petrochemical industry, water treatment for environmental protection (Chiller, Heat pump water heater ), welding equipment, laser equipment and some other systems for monitoring. The switch with high performance, it equipped with permanent magnet. Just has one removable part. The Operating principle is easy
Characteristic:
*No wearing and fatiguing parts applied, featuring stable performance and long service time.
*Tap water or oil applied, without using filters.;
*It could be installed horizontally and vertically;
*Full nylon structure, various liquid corrosion resistance.
*Obstruction of the liquid is small, high effciency.
*Max pressure is greater than 2Mpa; .
Operation Explain
Flow switch is mainly used in the system to instruct switch on/off according to flow rate. To set a highest lowest flux in the flow switch, when the flow rate reach the set value, flow switch releases signal or alarm, and the system will work or stop.
Electrical Characteristic:
| Electrical Characteristics |
Units |
|
| Material |
|
NYLON |
| Ring Material |
|
NYLON |
| Tempe Rating |
ºC |
30~+90 |
| Max Pressure |
MPa |
2 |
| Max Volume |
|
30L |
| Max Contact Rating |
W |
70 |
| Max Switching Voltage |
VDC |
≤230 |
| Max Switching Current |
A |
1.0 |
| Max contact Resistance |
mOhm |
200 |
| Electrical Life (at Resistance load ) |
VDC/mA |
1.5x10 7 (20/500) |
| Cable Type |
|
UL1332-AWG22 |
| Cable Length |
mm |
400 |
| Cable Color |
|
Black |
Audited Supplier 
){kind=link}
){kind=link}