G2′′ Paddle Type Flow Switch
|FOB Price:||US $1-11 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $1-11/ Piece|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
- Model NO.: FS-M-PD014B
- Certification: UL
- Media Type: Liquid
- Pipeline Connecting Thread: G2′′
- Cable Interface Type: DIN 43650 Connector
- Transport Package: Carton
- Origin: China
- IP Rating: IP68
- Type: Differential Pressure Flow Switch
- Principle: Eddy Current
- Fluid Housing Material: Nickel-Plated Brass
- Trademark: Bingo
- Specification: IP65
Paddle Type Flow Switch FS-M-PD014B Description:
FS-M-PD014B overcome the drawbacks of large pressure drop of the target type flow switch on the market, low hydrostatic drive and low shell protection grade, for the changes in pipeline liquid, gas and flowing solids flow or drying up have a reliable protection, is a update product of common target flow switch.
For more stringent of water flow must be recalibrated the protection flow values in the test bench which has installed flowmeter, for flow less demanding needs multimeter resistance measuring two lines on-off of water flow control switch.
First use the hand to simulate flow to push the baffle, whether has on-off change in multimeter, the force with hand pushed the baffle amount to the size of the water flow, adjusted using inner hexagon carefully tighten the M3 set screws, if excessive screw may lead the magnetic switch glass tube breakage consequently failure.
1. The flow control switch mounting position is usually installed in the pump water exported equipment and outlet piping, not to be installed in the pump suction inlet piping, as it may easy make the pump not function properly, flow switch can not be opened, too. This point need to pay special attention.
2. The flow control switch permit horizontal (plastic part on top) and vertical mounting
3. Install the flow switch needs to pay attention to the direction of flow in the pipeline, which must be consistent with the direction of the arrow in the upper part of the flow switch on the copper shell, otherwise flow switch does not work.
4. Electrical output and flow adjustment
5. Flow control switch SPDT passive normally open or normally closed dry contact output can customized.
|WFS22 series paddle flow switches|
|010||Pipeline connecting thread:G3/8|
|015||Pipeline connecting thread:G1/2|
|020||Pipeline connecting thread:G3/4|
|025||Pipeline connecting thread:G1|
|032||Pipeline connecting thread:G1-1/4|
|040||Pipeline connecting thread:G1-1/2|
|050||Pipeline connecting thread:G2|
|B||Fluid housing material:nickel-plated brass|
|C||Interface types:both ends outside thread tee|
|1A||Cable Interface type: DIN 43650 connector|
|2A||Cable Interface type: common connector|
|010||Max flow setting range. Unit: L/min|
|/1M||Wiring length: 1M=1 meter wire length. Choose DIN 43650 connector no such suffix|